720 hourly rows · MID-class heat meter present: no
2.05efficiency (COP) over 720 hours, from the heat meter better than 1% of the metered fleet in January 2026
Electricity used
820 kWh
Heat delivered
1682 kWh (heat meter)
Estimate without heat meter
flow sensor 2.08 · temperature model 3.11
Mean outdoor temperature
6.4 °C · 591 space-heating hours · cooling 3 kWh removed (3 kWh electricity), kept out of the COP
Flow temperature at 0 °C outside
42.4 °C (curve slope -0.47 per K)
Flow − return while heating
5.3 K
House needs at −3 °C
5.9 kW (unit rated 8 kW) · fit r² 0.07
Hot water
12% of electricity, COP 3.45
seriousWinter efficiency 2.05 is below the 3.0 floor used for German subsidies
Ask the installer for a commissioning check; the causes are usually flow temperature, hot water settings, or sizing, all listed below.
noteOwner’s note on the source site: “No data”
valueReaching the fleet’s January median (3.69) would have saved about £91 in this window at 0.25 GBP/kWh. An estimate, not a promise.
Day by day
electricity per daydaily COP3.0 floor
Daily COP needs a heat meter; days without one show electricity only.
The installed heating curve
one heating hourfitted curve50 °C
Each point is one hour of space heating. Lower and flatter is cheaper; well-set radiator systems sit around 35–42 °C at 0 °C outside.
Public system published by its owner on HeatpumpMonitor.org. Cycling (starts per hour) comes from the site’s 365-day statistic. Findings use installer rules of thumb; see methodology.